Panasonic
Panasonic's Hit HD range of modules are widely regarded by many as the 'Rolls Royce' of PV, small and compact compared to other modules within the market place.
Per square metre Panasonic produce the most efficient modules, helped by the use of both crystalline and thin film solar technologies (known as hybrid modules). Thin film generates power in lower light conditions than its crystalline counterpart. Panasonic modules are often recommended to clients with a limited installation area as a means of maximising system generation output. We stock three Panasonic SE10 Series models namely 235W, 240W and 250W.
Panasonic 235W SE10 Series
- Made of thin monocrystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. The amorphous silicon is able to capture lower wavelengths making them more efficient
- Contain bypass diodes which minimise the loss of output when shading occurs
- Module efficiencies of 18.6% which can be maintained at high temperatures
- Dimensions – 1.26m2 (1,580 x 798 x 35mm)
- Weight – 15kg per panel
- 10 year product warranty
- 10 and 25 year performance warranty for power outputs of 90% and 80% respectively
Download Panasonic HIT Technology PDF
(492.5KB)
Panasonic 240W SE10 Series
- Made of thin monocrystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. The amorphous silicon is able to capture lower wavelengths making them more efficient
- Contain bypass diodes which minimise the loss of output when shading occurs
- Module efficiencies of 19.0% which can be maintained at high temperatures
- Dimensions – 1.26m2 (1,580 x 798 x 35mm)
- Weight – 15kg per panel
- 10 year product warranty
- 10 and 20 year performance warranty for power outputs of 90% and 80% respectively
Download Panasonic HIT Technology PDF
(492.5KB)
Panasonic 250W Series
- Made of thin monocrystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. The amorphous silicon is able to capture lower wavelengths making them more efficient
- Contain bypass diodes which minimise the loss of output when shading occurs
- Module efficiencies of 18.0% which can be maintained at high temperatures
- Dimensions – 1.39m2 (1,610 x 861 x 35mm)
- Weight – 16.5kg per panel
- 10 year product warranty
- 10 and 20 year performance warranty for power outputs of 90% and 80% respectively
Download Panasonic HIT Technology PDF
(492.5KB)
Panasonic 230B/235B
The HIT (Heterojunction with Intrinsic Thin layer) solar cell is made of a thin monocrystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. This product provides the industry's leading performance and value using state-of-the-art manufacturing techniques. The development of the HIT solar cell was supported in part by the New Energy and Industrial Technology Development Organization (NEDO).
Panasonic is truly committed to quality since it began developing and manufacturing solar PV modules in 1975. Our long track record is supported with our claim-rate of only 0.0023 % out of 3,121,519 solar modules produced in our European factory in Dorog, Hungary (as of April 2012).
Even at high temperatures, the HIT solar cell can maintain higher efficiency than a conventional crystalline silicon solar cell. This is particularly relevant in all-black modules, where heat absorption is greater. Our black- backsheet modules minimise that effect, achieving a top-level temperature performance.
HIT solar modules are 100% emission free, have no moving parts and produce no noise. The dimensions of the HIT modules enable a space saving installation and the achievement of maximum output power possible on a given roof area.
Download Panasonic PDF
(552.5KB)
